Features and Benefits
- Dual simultaneous H.264 and MJPEG video streamsÂ
- Video latency under 200 ms
- Moxa DynaStreamâ„¢ function supported for network efficiency
- OnVIF supported for standardization and interoperability (after firmware V2.0) Â
- 802.1X and SSL/SSH for advanced network security
- Industrial design with -40 to 75°C operating temperature
- VPort SDK PLUS provided free
Introduction
The VPort 364A is a 4-channel industrial video encoder that supports the H.264 video compression algorithm, which uses less bandwidth than other video compression standards; the VPort 364A provides the best video quality available on the market today. In addition, the VPort 364A supports simultaneous dual video streams with different formats: H.264 and MJPEG. The two video streams can be used for different purposes, such as viewing, recording, or analysis. In addition, the rugged industrial design with -40 to 75°C operating temperature, built-in fiber Ethernet ports, IP30 form factor protection, and industrial certifications, make the VPort 364A highly suitable for use in harsh environments.
| • Video | |
| Video Compression | H.264 (MPEG4 part 10, AVC) or MJPEG |
| Video Inputs | 4, BNC connector (1.0 Vpp, 75 ohm) |
| Video Streams | Dual streams (one for H.264, the other for MJPEG) |
| NTSC/PAL | Manual |
| • Video Resolution and FPS (frames per second) in single video stream | |
 | |
| Video Viewing | • DynaStream supported for changing the video frame rate automatically • Adjustable image size and quality • Timestamp and text overlay |
| • Audio | |
| Audio Inputs | 1, Line-in or MIC-in with RCA connector |
| Audio Outputs | 1, Line-out with RCA connector |
| Audio Format | Mono, PCM |
| • Network | |
| Protocols | TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X (Pending), SSL/SSH (Pending) |
| Ethernet | 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (single/multi-mode, SC connector) |
| • Serial Port | |
| PTZ Ports | 1, RS-232/422/485 port (5-pin terminal block connector), max. speed of 115.2 Kbps |
| Console Port | 1 RS-232 RJ45 port |
| • GPIO | |
| Digital Inputs | 4, max. 8 mA Low: +13 V to +30 V; High: -30 V to +3 V |
| Relay Outputs | 2, max. 24 VDC @ 1 A |
| • LED Indicators | |
| STAT | System status |
| PWR1 | Power 1 |
| PWR2 | Power 2 |
| FAULT | Can be configured to correspond to system alarm, power failure, or disconnected network |
| V1, V2, V3, V4 | Video input signal activity for channels 1 to 4 |
| • Power Requirements | |
| Input Voltage | 2 12 VDC or 24 VDC/VAC inputs for redundancy, terminal block connector |
| Power Consumption | Max. 7.5 watts |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Dimensions | 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) |
| Weight | 1110 g |
| Installation | DIN-Rail mounting or panel mounting (with optional mounting kit) |
| • Alarms | |
| Video Motion Detection | Includes sensitivity tuning |
| Video Loss | Video loss alarm |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Email/FTP Messaging | Automatic transfer of stored images via email or FTP with event-triggered actions |
| Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
| Pre-alarm Buffer | 24 MB per channel for JPEG snapshot images |
| • PAN/TILT/ZOOM | |
| PTZ Camera Control | Via RS-232/422/485 PTZ port |
| PTZ Control Functions | PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 24 custom commands |
| PTZ Function Updates | Driver upload supported |
| Supported Device Protocols | Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera |
| Transparent PTZ Control | Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder |
| • Security | |
| Password | User level password protection |
| Filtering | By IP address |
| Authentication | 802.1X (Pending) |
| Encryption | SSL/SSH (Pending) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Standards and Certifications | |
| EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS | EN 61000-4-2 (ESD) Level 2, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-11 |
| • MTBF (mean time between failures) | |
| Time | 465,000 hrs |
| Database | Telcordia (Bellcore), GB 25°C |
| • Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
| • System Requirements | |
| CPU | Pentium 4, 2.4 GHz or above |
| Memory | 512 MB memory or above |
| OS | Windows XP/2000 with SP2 or above |
| Browser | Internet Explorer 6.x or above |
| Multimedia | DirectX 9.0c or above |
| • Software Development Kit | |
| VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website). |
| Standard | OnVIF (Pending) |
